DIY tire vases: video and important tips

• Do-it-yourself flower bed from tires: photo examples of flower beds from wheel tires and the technology for their creation
• Features of creating a flower bed from wheel tires: photo examples and tips for making flower beds
• Making a flowerbed from a tire in the form of a flowerpot: step-by-step instructions
• Photo instructions for a flowerbed made of tires in the form of a flowerpot on a leg
• Technology for creating a tea set from a rubber tire
• Creating a flower bed from car tires: video and recommendations for choosing flowers
• Video: how to make a swan from a tire with your own hands

Do-it-yourself flower bed from tires: photo examples of flower beds from wheel tires and the technology for their creation

At first glance, it may seem that worn-out rubber from a car tire is not the best material for creating a flower bed. The rounded shape of the tire itself looks quite simple and boring. But this does not mean that the design of a flower bed made of this material is strictly limited to its original shape.

Flexible rubber allows your imagination to run wild and come up with many design options that are suitable for creating a flower garden on your site. Most of these products do not even evoke the idea that the material for their production was old car tires.

Flowerpots made from car tires in the courtyard of a private house.

Conventionally, the most popular design options can be divided into several categories:

• objects (pot, tea set items, for example, cup, teapot);
• birds (flamingos, swans, cockerels, parrots, penguins);
• flowers;
• animals (turtles, frogs, pigs);
• figured objects (pots and flower beds with original slots and curved shapes).

A flowerbed made of tires in the shape of a cockerel.

The ease of processing and the characteristics of the material allow you to create unique landscape design objects from old car tires.
Each type of design has its own manufacturing features.
Using recommendations for creating beautiful flower beds from car tires, you can easily fill your garden with original products.

Garden and country furniture made from tires

It’s hard to believe, but even furniture is made from tires: ottomans, tables, armchairs. all this can be made from an old tire. The easiest way to make ottomans is to place several tires of the same diameter (or not) one on top of the other, and fasten them together from the inside with self-tapping screws. Fill the top one with dense furniture foam, sew and put on a cover. If desired, you can attach legs: at least screw on furniture wheels. It’s easier to move around on wheels and doesn’t stain the floor; the second way out is to attach felt at the bottom (on staples from a stapler).

Below are step-by-step photos showing the main stages of creating a table or ottoman from a tire. You will need two more circles of plywood or fiberboard of a suitable diameter; hemp rope is used for finishing. From available materials you will need glue and a glue gun, as well as varnish and a brush for applying it. To connect the circles to the tire you will need a screwdriver and self-tapping screws - 8-10 pieces on each side.

Ottoman or table made from an old tire

Next, take a glue gun and heat up the glue and apply it to the sidewall. If you don’t have such a luxury on your household, take glue that comes in a larger tube, like “liquid nails.” It is easier for them to work with a mounting gun. Apply a stripe to the side and glue the hemp rope. So - all the way to the top.

Cover the sides with hemp rope

Using the same technology, we decorate the lid of the table (ottoman). You need to start laying from the middle: apply glue, lay the rope.

Decorating the table cover

Finishing the work - applying varnish. We do it slowly, soaking it well. This is what should happen as a result. If you made a table, you can put glass on top - a rope, even varnished, is not the best covering for a table, although it is beautiful...

This ottoman table was made from an old tire and hemp rope

Variety can be achieved through the cover. It can be sewn from the dense material you like.

You can knit it - large knitting looks interesting.

Large knitted cover - looks interesting

If you don’t want to sew or knit, you can use old knitted items cut into strips. They are cut into long strips 3-5 cm thick, rolled into balls and then wrapped around the ottoman. It turns out interesting, especially if several colors are combined.

Cut old knitted items into strips, roll them into balls, and wrap the top around the ottoman. The result is in front of you

Same technique in different colors

If you need a taller ottoman, screw the two tires together with self-tapping screws and continue working with them in this form.

How to make a high ottoman

This is the result of labor

Another option, see the video

To create an expressive appearance, a flowerbed needs a border designed to clearly indicate the boundaries of the structure. An unusual solution in this situation is old car tires, which car owners throw into landfills as unnecessary, simply polluting the environment. A product made with your own hands from a used tire will not only help protect the environment, but will also become a spectacular decoration for a flower bed in your garden plot.

Features of creating a flower bed from wheel tires: photo examples and tips for making flower beds

Flowerbeds in the form of voluminous flowerpots can most often be seen in suburban areas. Such designs are simple to implement and have an impressive appearance.

To begin with, you should take care of the availability of the necessary tools, materials and related devices:

• sharp knife;
• stones or pebbles of various sizes (additional decor);

Various options for flower beds made from old tires.

• tires;
• coloring composition;
• primers;
• chalk (soap, marker) for marking;
• metal mesh;
• tassels.

On a note! To quickly and easily cope with cutting rubber, it is recommended to use a grinder or an electric jigsaw. If a power tool is not available, a sharp knife can be used. Moisten it with soapy water, which will make the work much easier.

A flower bed made from a car tire in the shape of a garden cart.

The simplest flowerbed in the shape of a turtle will require two identical tires, an old rubber ball and a spring. One tire is laid on the ground and remains intact (it will be the body), the second is cut so that in the end there are four pieces of the same size. The cut parts are fixed to the structure. These will be the paws. Using a spring (neck), a ball-shaped head is installed on the body.

Steps for creating a flower bed in the shape of a turtle from two car tires: 1 - for the turtle’s paws, cut one of the tires into 4 equal parts; 2 - fasten the cut parts of the tire in the slots of the whole tire, fix a plastic bottle that will serve as the turtle’s head; 3 - paint and decorate the finished structure.

The finished product is painted. The necessary details are completed: eyes, nostrils, mouth. According to this principle, you can create figures of other animals.

We select and prepare tires for making flower beds with our own hands

Old car tires will be soft after a long period of use and will be easier to shape into the desired shape. You can ask your neighbors for tires - motorists who do not need them. You can also pick up used car tires at service stations, since they would otherwise simply be thrown into a landfill. And if you have the opportunity to choose between domestic and imported tires, then it is better to make flower beds from imported tires. Because tires from foreign manufacturers are much softer , so it is easier for them to give different shapes, turn them out, etc.

Dirty tires should first be cleaned of as much dirt and sand as possible. After all, it’s more pleasant to work with clean material, and the blades of the knives will become dull faster when working with tires dirty with dirt and sand.

Making a flowerbed from a tire in the form of a flowerpot: step-by-step instructions

The manufacturing technology of this product involves turning the tire inside out. This is why it is so important to choose tires with soft and thin rubber. Main stages of work:

1. Cutting out petals.
2. Turning the tire inside out.
3. Coloring and decorative finishing of the finished product.

Flowerpots made from car tires serve as decoration for the yard of a private house.
The shape of the petals can be absolutely any:

• triangular;
• rectangular;
• wavy;
• round;
• in the form of leaves;
• abstract, etc.

These petals will subsequently be located along the edge line of the flowerpot. Markings using chalk or soap are applied to the top of the tire (on one side). Using a cutting tool (scissors or jigsaw), make cuts along the marked lines.

We cut out the petals of the future flowerpot.

Turning the tire inside out will require some skill and effort. To achieve the desired result, you need to turn the tire over with its whole side up, grab the product with your hands by the edge line of the cuts you just made located at the bottom, and, pressing on the tread, carefully turn it out. About halfway through the work, the tire should be flattened into an oval. After this, turning it inside out will become even easier.

Turn the tire inside out.

The last step will be painting the finished product in the chosen color. It is better if the shade is in harmony with the overall appearance of the area. Solid colors look attractive, but a variety of colors will make the flower bed more impressive.

We paint and decorate the finished product.

Photo instructions for a flowerbed made of tires in the form of a flowerpot on a leg

The easiest way to make a standing flower bed is to attach 3-4 legs to the previously described version of the product. To create them, you can use semicircular tire scraps (the area near the disk), bent pipes or fittings.

Stages of creating a flowerpot on a leg from a car tire.

To create a more stable flower bed, you can use a tire equipped with a metal disk. The technology of implementation is almost the same as in the previous case: the wheel is laid on a flat surface, markings are applied in the form of petals and cuts are made all the way to the tread. Both parts of the tire are turned outward.

Note! A small part of the tire remains with the rim. There is no need to take it out. This element will be used as a leg for a flowerpot.

Examples of flowerpots with legs made from tires.

The elements are stacked on top of each other to create a large flowerpot on a leg. It needs to be painted before planting.

Decorative design can be very diverse:

• coloring the product to look like a flower (colored top, green bottom);
• imitation of a concrete or metal flowerpot (depending on the color of the paint);
• applying beautiful patterns or designs;
• decoration using pebbles, glass, shells and other elements.

A flowerpot on a leg made from an old tire, located in the garden.

Necessary tools

Before starting work on creating a flower bed from tires with your own hands, you need to make sure that you have the necessary materials and tools. To make the simplest, most concise version, you only need the tire itself and paint. All you have to do is paint this wheel an interesting color, fill it with soil, and plant flowers.

If you complicate the design a little, build a multi-level flowerbed in the form of a pyramid, then, in addition to old tires of different diameters and paints, you need to arm yourself with a screwdriver and self-tapping screws to securely fasten tires stacked on top of each other. It would not be a bad idea to stock up on geotextiles: it is convenient and prudent to lay it in the tires from the upper levels so that the soil in them does not spill out or collapse. To create flowerpots in the form of flowers, animals, bowls, and goblets from tires, the tires will have to be cut, glued, and decorated with additional elements. For this you will need:

• a well-sharpened knife, or jigsaw, or grinder (circular saw);
• For safety, gloves and safety glasses are required, and a respirator may also be useful;
• chalk, or marker, or soap - for drawing a cut line;
• to create patterns, in addition to spray paint, brushes may be required;
• to increase the adhesiveness of the paint, it is a good idea to treat the rubber surface of the wheel with a primer;
• various decorative elements (pebbles, colored tiles and glass, plastic bottles, fabrics, twine, polystyrene foam, etc.).

Technology for creating a tea set from a rubber tire

A tea set in the form of a cup and teapot is quite easy to create. For a kettle you will need three tires with different diameters. The largest tire is placed underneath. It will serve as the bottom. Two other tires are laid on top of it. Moreover, the smaller of them should be in the middle of the structure, and the one that is larger (but smaller than the bottom) is placed on top of it.

Flower beds in the country: ideas for creating with your own hands (read more)

To form the spout and handle you will need pipes. The spout is made from a drain with a curved shape. For the handle, a regular pipe with a diameter of 3 cm is suitable. It needs to be shaped into a hook. Having made these elements, they should be attached to the structure at the fastening points and mark the cut lines where they will subsequently be inserted and secured.

A flowerbed in the shape of a cup looks original and is simple to make.

The cup is made from three tires of different sizes. Take a pair of tires from a passenger car. You will also need a large truck tire. It will serve as the basis for creating a saucer. To do this, the top is cut off from the product. Both edges (outside and inside the wheel) are processed so that a flat part remains, resembling a saucer. It is slightly buried in the soil, and tires from a passenger car are installed on top (one on top of the other). The resulting tea set items are filled with soil into which flowers are planted.

Various options for flower beds made in the form of tea set items.

Creating a flower bed from car tires: video and recommendations for choosing flowers

The flowerbeds, which resemble animals, are partly made from whole and cut tires. A flower bed in the shape of a swan is considered one of the most difficult options for making a flower bed. It involves a method of turning the tire out. But at the same time, complex markings are made.

Flower beds in the shape of swans, created from car tires.

Cutting with an electric jigsaw must be precise and neat. To make the bird's neck curved and fix it in this position, you should use a wire. The decor is done in such a way that the flowerbed looks like a swan. The beak is made separately.

Scheme for making a swan from a car tire.

On a note! The finished flower garden is covered with soil and flowers are planted in it. Plants of the cascade type (petunia, pelargonium, tumbelina) or ampelous type (those with long flexible shoots) are suitable for these purposes. Hanging shoots dotted with flowers look very beautiful.

The following flowers are suitable for creating compositions with a combined height:

• petunias;
• marigold;
• pansies.

Dahlias, phlox, plants with unusual shapes and foliage can be placed in the central part. They will attract the eye and concentrate attention at the required point.

Photo examples of flower beds made of brick and other materials (read more)

Having tried simple methods of making flower beds from old tires, you can move on to more complex designs. The tires are suitable for flower beds in the form of snails, frogs, parrots, zebras, bears, and turtles.