ByAdmin headset, how to connect to a computer, phone
Plastic porch in a private house photo
Glazing of the porch with double-glazed windows. Below is a double-glazed porch for a private house, a photo of the classic version.
Site map View also may be a glazed porch of a private house, photo examples Glazing a porch is a controversial issue.
On the one hand, it’s nice to go out, breathe in the air, and admire the views of nature, but on the other hand, a plastic porch in a private house photo, an open extension loses its functionality if there is bad weather outside. The glazed porch, we selected photos of interesting solutions for the article, protects the entrance to the house from precipitation and gusts of wind, and in addition, several meters of usable space appear - it is practical, comfortable, convenient.
Glazing of the porch of a country house
Next, we will look in detail at how to properly glaze a plastic porch in a private house photo, what advantages appear in this case, how to choose frames so that they create a reliable barrier from bad weather, but at the same time do not spoil the appearance of a plastic porch in a private house photo, and do not block landscape view.
Functionality and specificity Of course, the glazing must be well thought out, fit organically into the ensemble of the entrance here, prevent rain, wind, snow and cold from entering the house, but at the same time let in enough sunlight, and provide additional heat and sound insulation. Glazing of the porch can be done in several ways, depending on the specifics of the extension, whether it will be warm or cold.
Today, the construction market offers several options: sliding and frameless systems, PVC, aluminum https://stroydesign24.ru/recuperator-for-frame-house wooden plastic porch in a private house photo.
❻
Each type of glazing has its own characteristics, and the choice mainly depends on the purpose of the porch. Photo glazing of the porch of a country house, this option is most convenient if you need to close a small opening Portal sliding systems Portal glazing is possible if the porch has a reliable roof and 2 walls between which the system is installed.
For the shutters, a porch made of plastic is used in a private house, photo of a high-strength profile.
Benefits of glazing
When glazing the porch of a house with modern systems, the following opportunities appear:
- Open door and window openings using various systems, which can be:
- Lift-and-slide.
- "Accordion."
- Sliding.
- Rotary.
- Exactly repeat the architectural shape of the porch structure;
- Install full or partial roof covering with sheet glass;
- Adjust the height and width of open openings, ensuring free flow of light and air flows;
- Install mosquito nets of various modifications.
Porch glazing methods
Before glazing the porch of a private house, it is worth getting acquainted with glazing methods and their features.
The main types of systems are presented in the table:
Glazing type | Peculiarities |
| This method is considered traditional and the simplest for sealing a structure. |
| Glazing of the porch with plastic is carried out in fairly harsh climatic conditions. In this case, double-glazed windows with a thickness of 24 to 42 mm are inserted into PVC frames. To prevent heat loss, glass can be used with a low-emissivity protective layer. The advantages of PVC frames are:
The disadvantages of PVC include the limitation of sizes for use in panoramic porches. |
| In this case, glass framed with an aluminum profile makes up a portal of doors that can slide apart in different directions, creating free space and letting in the maximum amount of light and air. In addition, the advantages of the system are:
Disadvantages of aluminum frames:
|
| This is a synthetic material, a close relative of plastic. Its main advantages:
|
| When planning to use the glazed porch of a private house as a decorative element of the facade, frameless glazing is installed on it. These are glass panels covering the entire height of the structure, and they move along guides that are fixed to the floor and ceiling. The advantages of frameless glazing include:
Disadvantages of frameless glazing:
|
Choosing glazing for the porch of your home
Before you make a glazed porch for a private house, you need to determine whether it will be a heated veranda or a cold one. In this case, in the first case, warm glazing is used using aluminum structures, the basis of which is a warm aluminum profile.
Thanks to the design of such systems it is possible:
- Full use of the veranda in winter and summer;
- In winter, use a fireplace or organize a greenhouse;
- In summer install a barbecue.
For verandas without heating, cold glazing is used. Its main purpose is to protect the room from rain, gusts of wind, dust and excess noise.
In this case, all-glass structures or structures made of cold aluminum profiles are used. Windows and doors can fold, slide or rotate.
Advice: Before glazing the porch in a cottage, you should analyze the structural features, architecture, and general style of the house and adjacent buildings.
Heated terrace
Summer terrace
Examples of glazed porches of private houses
The doors are equipped with rollers, and they move along a guide installed in the opening. The downside is that this is cold glazing, it will not be possible to insulate the porch, the doors can only open in one plane, and they overlap one after another, limiting the entrance. The maximum height of the sash is 3 m, width - 1.5 m.
❻
Plastic windows PVC windows are the most popular and budget option for glazing the porch in both a cottage and a country house. Depending on the climate and the requirements for the extension, the thickness of the profile can be from mm.
The market is represented by a huge selection of colored and textured PVC profiles, so glazing the porch with plastic is suitable for different stylistic solutions.
Glazing of the porch and terrace with plastic windows of a country and private house – 38 photos
But the wide frame significantly blocks the view, which in some cases is not acceptable for a private country house. In addition, PVC windows have size restrictions, the maximum area of one sash is 2.8 m2, if you need to glaze a larger area, then partitions are installed, 1 frame can be no more than 6 m2.
❻
An opening sash cannot be wider than 1.2 m and a height of no more than 2.2 m. A blind sash can be 2 m wide, 3 m high, the maximum width of an opening sash is 1.2 m. In warm systems, double-glazed windows and a thermal insert are installed thickness up to cm.
We BUILD a house porch with our own hands FOR OURSELVES
It should be noted that such glazing reliably protects the porch from dust, wind and precipitation, but it is impossible to insulate the extension. The combination of wooden and cold aluminum glazing is an ideal and inexpensive solution for large areas Wooden frames Wooden windows are a traditional, budget and simple option for porch glazing.
❻
Of course, single frames with 4 mm glass will not retain heat in the extension in frosty weather, so for a warm look, it is better to use more expensive wooden windows, with the possibility of installing double-glazed windows. The price for such systems is much higher than for plastic, and in addition, https://stroydesign24.ru/project-bath-house-drawings must be carefully processed before installation, which further increases the cost of glazing.
Glazing of the veranda
When glazing a veranda with your own hands, you must rely on a previously drawn up design project.
It is worth considering:
- The veranda or porch should remain bright and spacious. This is achieved by installing large windows;
- A sufficient amount of fresh air must penetrate into the room - a system is selected with a large number of flaps;
- It is necessary to use protection against insects, which requires the purchase and installation of mosquito nets;
- The method of glazing depends on the existing style of buildings.
Simple structures can be installed according to pre-made calculations and measurements. More complex buildings are built with stairs to the second floor. The material is often used old frames with one glass, after pre-processing them. With the correct selection of frames, glazing can be done fairly quickly.
Installation of glazing on the veranda
Porch glazing with wooden frames
Wooden frames for glazing verandas
Even if you have minimal construction skills, you can make a glass porch using wooden frames yourself, without the involvement of professionals.
Not so long ago, frames with a large number of wooden bindings and small glass sizes were popular. Now this option is a retro style, and looks good only in houses with a classic design. A modern solution is large frame sizes with 1-2 glasses.
The procedure for installing frames is as follows:
- Along the perimeter of the room, a window frame, which is a wooden frame made of timber, is attached to the frame with nails or self-tapping screws.
- All cracks are filled with silicone sealant.
- Window frames are attached without glass. When installing frames, you can use hinges - this swing design is the easiest for installation.
- Glass of certain sizes is installed in the openings and secured with glazing beads, which are thin slats attached to the frame on both sides - outside and inside.
- The frame and glazing beads are carefully painted to protect the material from rotting.
Tip: Before painting, glass should be covered with paper to avoid accidental splashes of paint, which are very difficult to clean.
- All seams are coated with sealant, which will protect the room from drafts.
But keep in mind that wooden frames do not provide ideal protection from the cold. This option is best used for summer glazing.
Porch glazing with polycarbonate
Before glazing the porch with polycarbonate, double sheets with a thickness of 8 - 10 mm are purchased. For a large veranda area, material from 14 to 16 mm thick is suitable.
Further instructions for performing the work suggest:
- Prepare the foundation. This structure does not require a serious foundation; it is enough to use a columnar and strip version.
- A polycarbonate frame is being made. To do this, you can use rolled corners, channels, metal pipes or wooden blocks.
- The frame is attached to the foundation.
- The sheathing is assembled from wooden beams with a diameter of 5–10 cm, which depends on the size of the building. The pitch of the elements is 600 – 800 mm. This will allow the structure to withstand a lot of snow in case of heavy snowfalls, when glazing the porch with monolithic polycarbonate.
To glaze the porch at the dacha, you must follow some rules:
- The sections of the panels must be covered with planks or special tapes, only on those that are turned down;
- Drainage holes are made to allow moisture to escape;
- When glazing, individual panels are connected by strips into a continuous sheet;
Tip: Polycarbonate sheets should be secured with self-tapping screws with thermal washers to provide a seam for linear expansion of the material when it is heated in the summer months.
- With strips and transparent sealant, polycarbonate is securely attached to the sheathing;
- Polycarbonate sheets are not attached rigidly. The gaps left will help the sheets remain undamaged by thermal expansion.
Porch glazing with double-glazed windows
The installation of plastic frames is usually offered by companies that manufacture structures. However, the cost is usually not too high. But you can install windows yourself.
For this:
- Frames are ordered according to individual sizes, with the selected type of fittings. Designs can be:
- Rotary.
- Swivel and tilt. Such systems allow you to ventilate the room without opening the window completely.
- Sliding . This does not require space in the room, but their durability is lower.
- Before installation, window sashes are removed from the frame to protect the glass from damage during installation;
- The frame is mounted using fasteners: self-tapping screws, dowels;
- The cracks that appear after installation are filled with polyurethane foam;
- The sashes with glass are put in place.
Installation of aluminum frames
Aluminum frames for porch
Structures with aluminum frames are mounted in a similar way. One of the main differences is the type of fittings. For verandas, sliding frames are chosen to create the illusion of an unglazed room.
- In this case, the frames are carefully moved into the corner, as in the photo, and the room will be filled with light. In cloudy weather, they can be easily closed, and the veranda area is protected from the weather.
- When installing a window frame in an opening, anchor plates are used. The space between the window frame and the aluminum frame is blown with foam, which insulates the room from drafts.
- When installing sliding frames, locks and special runners are used. Along them, the doors will move sideways on rollers along guide rails, which is quite convenient to use.
- To properly carry out glazing, it is suggested to preview the video in this article: “Glassed porch in a private house.”
By choosing any option for a glazed porch, you can make the design more comfortable and beautiful. Which system to choose depends on the climatic conditions, where the structure is being installed, the need to ensure noise and heat insulation, and the design of the extension.