TOP 27 children's swings for the street, dacha [Rating and guide of choice]

For whom and what are the benefits of a garden swing: obvious facts and important nuances

Don't assume that swings and slides are only for children. Beautiful products will decorate any summer cottage. Durable structures can withstand the weight of a teenager and an adult. It should be remembered that appropriate entertainment and play facilities will distract the child from other activities for a long time. This tool will “create” free time, which parents can use at their own discretion.

Reliable outdoor swing for children and adults can be used as a sports exercise machine

After carefully studying this issue, it is not difficult to formulate the following positive results:

• A swing for babies is an effective tool that replaces a cradle. With their help, specific movements are created without extra effort so that the baby falls asleep peacefully.
• When the child begins to walk, a garden children's swing will help develop the vestibular apparatus, dexterity, and strength. They will be useful for studying the world around you and your own physical capabilities.
• Even a small home swing for children in an apartment is quite suitable for teaching independent actions.
• Double and balancing stationary models for a child in the country will help to establish communication with peers.

For your information! The attractive, well-thought-out design provides good conditions for physical activity. It distracts attention from computer games and other sedentary activities. A high-quality children's sports complex with swings for babies is an effective preventive measure. It improves health and improves the body's protective functions.

Swing with slide, sandbox, house, flexible stairs. This complex can be used to organize various games and sports activities.

For small children, you can create a comfortable sleeping place from scrap materials

These swings for two are inexpensive

Round seats suitable for users of different ages

The price of these swings is higher compared to a simple homemade one. But such an autonomous design for teenagers and adults replaces the hammock. If necessary, it is not difficult to install it in another place

Fastenings must withstand significant loads without destruction

The photos with comments explain the need for serious preparation for this project. Double swings must be designed for a significant weight. Outdoor structures for adults are created with a sufficient margin of safety. Decorative and protective surfaces and materials are selected taking into account natural influences. You should create a diagram with dimensions and a list of components. It will be useful to study the reviews of the owners if you decide to buy a finished product in a store.

Classification of swings and features of different types

Adults need swings for relaxation, children need them for entertainment. Accordingly, such products can be divided into the following types:

Children's swing. They are light in weight and usually equipped with only one seat. For children, speed and a large swing amplitude are important. But special attention must be paid to the safety of the structure. It is better to give preference to swings made of wood or metal rather than ordinary rope models. The swing must be equipped with limiters to prevent excessive swinging and rotation of the “sun”. The seats must have fastenings for protection, eliminating the risk of a small child falling out.

Source: yandex.ru

Garden swing. Designed primarily for recreation. Usually made in the form of comfortable and soft hanging sofas that can withstand significant loads. Suitable for relaxing in the company of several people, or for a light nap in your own garden. There are models equipped with sun protection. Typically such protection is represented by a decorative canopy. The design is usually made of attractive materials to decorate the site.

Source: sunnyvilla.ru

Hammock swing. Made in the form of a lounger and designed primarily for relaxation. As a rule, you can swing on such a swing left and right, unlike traditional models where the swing occurs back and forth.

Classification of materials for children's outdoor swings for the garden, taking into account consumer characteristics

In any case, you need to decide what to make the appropriate structure from. The following list provides general requirements:

• The cost of suitable materials should be reasonable. When calculating, it is necessary to sum up the costs of purchase and transportation, processing and installation.
• Finished products will be used outdoors. Changes in humidity and temperature, direct sunlight, and other external influences should be taken into account.
• The reliability of structural elements and joints should not be in doubt. We must remember about static and dynamic loads.
• It will be useful if you do not need too much care over a long service life.
• In collapsible structures, special attention must be paid to the strength of the joints. But such products are easier to repair. After the end of the summer season, they can be dismantled for subsequent storage indoors.

Country wooden swing: ease of processing and other advantages

Such materials are not too difficult to process with your own hands.

To protect wood products, special impregnations are used. They prevent biological damage of various natures and prevent moisture absorption

Even complex elements can be made quickly using hand tools

Electrically driven equipment is used to speed up work operations

The simplest outdoor swing for children in the country can be made in a couple of hours, no more. After processing the edges, the board will make a good seat. To prevent the rope ropes from jumping off, notches are made in this part. Garden trees need to be carefully inspected. A strong branch at a height of 2 meters or more from the ground is suitable. A clamp is installed at the place where the upper fastening is installed, which will prevent the rope and the tree from coming into contact. This will increase the reliability of this node.

To securely connect individual parts of a homemade hanging structure, you can use metal carabiners with screw clamps

With the help of these photos, even without special comments, you can figure out how to strengthen the side parts of a swing seat for a summer house yourself

To create a more complex design, you will need drawings

For your information! Please note that with written documentation it is easier to establish the correct assembly sequence.

You can buy inexpensive country swings for children in an online store, with delivery. Manufacturers include a seat and suspension system as standard

Video: DIY garden swing made of wood

Plastic swings suspended and balanced: features of the use of materials

The different designs will be discussed in detail below. But for an objective analysis, it is better to take into account some parameters of different models when studying polymer materials.

Outdoor swing for kids, balancing type

To make such a product reliable, the developers correctly distributed stiffeners in the most critical places. You can see how smooth shapes can be created from plastic, without sharp edges or other unsafe elements. This lightweight design can be moved to the desired location without much effort. The wide base of the central part provides good support. To improve stability, this part can be made hollow. You can pour water inside or add sand to make it heavier during use.

Plastic hanging children's swing for the garden

The grooved surface of this seat prevents slipping. To prevent the ropes from fraying, they are passed through special liner tubes. They are securely secured with special blocks with locking rings. Ribs are visible in the lower part, increasing the rigidity of the structure.

Based on these examples, we can formulate the advantages and disadvantages of plastics:

• These materials make cute products for children that are resistant to various types of external influences. Dyes are added to the base of the mixture, so the brightness of the colors is maintained for a long service life.
• Polymers are well suited for creating complex products. If the project is developed correctly, a high level of safety will be ensured.
• Plastic structures, even when large, weigh little.

• The main disadvantage is the relatively low resistance of parts made from cheap hard polymers to strong impacts. One should not forget about the decrease in strength with decreasing temperature.
• It should also be noted the low maintainability. In this case, adhesive joints are recommended to be used only for attaching decorative elements.
• Some types of polymers are destroyed by ultraviolet rays and release allergens and unpleasant odors when heated. It is imperative to take into account possible unfavorable factors when choosing suitable products for your child.

Metal swing for a summer residence: reliability and durability

Durable iron garden swing for children and adults

Metal is heavier compared to wood and plastic. But it is from it that parts designed for high loads are made. This material is often used to strengthen structures and manufacture the most critical elements of supports and fastenings. The main disadvantage is the need for protection against corrosion processes. It is also necessary to note the following nuances that will hinder the successful implementation of the corresponding project:

• Making high-quality outdoor children's swings from steel with your own hands is not easy. The material is difficult to process and cut.
• To speed up work operations, you will have to purchase drills and hacksaw blades for metal, and tools with powerful electric drives.
• You can create a curved pipe shape without damaging the workpiece using a special machine.
• The production of forged elements and welded joints will need to be mastered. To accurately reproduce these and some other operating technologies, appropriate equipment is required.

These comments should be examined carefully to make a realistic assessment of the prospects for future action. At a minimum, you will need a preliminary design selection and drawings. With the help of these materials, it will be possible to draw a conclusion about whether it is worth creating a country swing yourself.

Metal balancing swing: drawings, dimensions, assembly diagram

Using this figure you can study individual elements:

• The most complex unit here is the special mechanism (I). It provides support and swing of the rocker arm (1) on the axis (11), free rotation of 360 degrees around the central shaft (8.9).
• The cage (3) fixes the required position of the ball bearings (4, 5). Protection from dust and precipitation is provided by a removable casing (2).
• The rocker arm is made of pipe 48 x 3.5 (diameter x wall thickness in mm). This part is welded to the cheeks of the bracket (12) with a strip (40 x 5 mm).
• The support legs are made from pipe (33.5 x 3 mm). Frame (15) and handle (13) made of metal rod (12 mm).
• To make the seat, you can use a wooden board or plywood with a thickness of 10 to 12 mm.

Before assembly, all external surfaces of metal parts, except bearings and axles, are successively coated with primer and paint. Lubricant is applied to moving joints to reduce the coefficient of friction and eliminate extraneous sounds. Wooden parts are carefully treated with sandpaper, impregnated with anti-rotting agents, and varnished.

For your information! The entire project can be divided into several stages. You can do some of the simple parts and assembly yourself. Welding joints and other complex operations are easier and cheaper to entrust to professionals.

Model of a factory-made swing

From this photo it is clear that it is difficult to create such a structure at home. Using the video, you can find out how to make a homemade swing for the street and cottage:

Related article:

DIY garden swing made of metal. There are many options for ready-made devices on sale, but it’s much more fun to make them yourself. The drawings, dimensions and photos of various designs described in the article will help you cope with this task.

Comfortable hanging swing for children

To properly assemble them in the garden as in the picture, you will need a frame. We will only make a seat that needs to be hung on a chain or rope to the ceiling or thick branches. A diagram must be prepared. The simplest hanging swing is an old tire tied with a rope and attached to a tree branch. Products on ropes are very strong. Rope swings are suitable for older children. You can also use a chain and fasten it with screws and nuts.

Another manufacturing option:

1. We place the tire horizontally.
2. We cut out 3-4 holes, install metal hooks in them, which must be secured with washers and nuts.
3. We thread ropes or chains into the loops of the hooks.

On such a swing you can swing children in the presence of their parents.

Classification of types of designs of children's outdoor swings for the garden

From the examples given, it is clear that most often a combination of several materials is used. This allows you to more fully use the existing advantages and at the same time reduce the negative impact of disadvantages.

How to make a beautiful and high-quality product will become clear if we consider in detail the different types of swings for children. The following photos with comments provide recommendations for performing work operations and creating individual units, examples of completed projects.

Step-by-step instructions: how to hang a jumping swing in your apartment

How to fasten two structures on one branch with a safe distance between them and to the tree trunk

In this video, the author of the project talks about how to assemble a complex metal structure. In terms of complexity and quality, it is not inferior to factory products.

The most difficult technological processes are easier to study using such materials. Here, for example, it is described in detail how to weld a frame from a steel corner:

Please note that in addition to a special rectifier and electrodes, you will need gloves, a mask, and other personal protective equipment. The work is carried out in a specially designated place, with strict adherence to safety regulations. To install a suspended structure on a tree, you need to figure out how to fasten it so as not to damage the fulcrum during operation.

The best technical parameters can be obtained by creating a power frame made of metal

Here the author of the project used a hook with a latch. It provides reliable fixation, but does not prevent dismantling if the need arises. In this example, we can note not only advantages, but also disadvantages. In the assortment of a specialized store, it is not difficult to select components designed for certain loads. But the ring and hook at the point of contact will be subject to wear. The paint layer will quickly be destroyed and traces of rust will appear. There is no way to learn how to eliminate squeaking during use using lubricant.

Different types of yard swings

The easiest to use are pendulum products like these. To place them, you just need to select a suitable flat area in the yard.

Important! Pay attention to the surface hardness of this option. If necessary, special stands are installed under the legs to increase the support area. You can also use a reinforced concrete slab of suitable size, or pour a small foundation made of mortar with reinforcement.

The swing is round, with a net, put away for storage during the winter season. In the spring, just check the attachment point. If everything is in order, with the help of a stepladder such a nest will be brought into working condition in a few minutes.

It is more difficult to figure out how to install stationary street structures. For a large, heavy structure, you will have to create a reliable foundation. In the calculation, it is necessary to take into account constant and dynamic loads, soil characteristics and the depth of groundwater. In domestic climatic conditions, with severe frost, heaving forces can push out the beam and disrupt the correct geometry.

On weak soil, reliable support can be created using screw piles

Boat swing on chains with basketball hoop and net

A compact floor-mounted home swing for a baby can be bought at a toy store.

The last two photos are factory products. You can view them and other professional solutions to take advantage of ready-made ideas to implement your own plans.

Spring mounting units provide increased degrees of freedom of movement in different directions

The following list shows the classification of products of this type according to several basic parameters:

• Indoor and outdoor models differ in the level of protection from external influences.
• Portable swings can be moved to another place or disassembled for storage during the winter season. Stationary structures are designed for year-round operation.
• Based on their design, they are divided into suspended and balancing models. There are modifications in each category. Rigid, flexible stretchable suspensions are used. To ensure the ability to move in several directions, the support units are equipped with bearings and springs.
• Swings with single, paired and larger seats.
• Grouping by materials relates only to the main elements of the structure. In practice, different combinations are often used: metal frame, rope suspensions, plastic and wooden seats.

Powerful electric motors power large swings and carousels in amusement parks. For private designs, such equipment does not make sense, because one of the main functions of the corresponding product is the development of the child’s physical capabilities.

Electric swings are available for small children. The motor drives not only the seat, but also special toys, “mobiles”. To enable individual functions, use the built-in control unit

Below is information about what other designs there are and how to build a swing from pipes, rings, and other standard products.

Children's hanging swing

Based on the knowledge gained, it is not difficult to formulate a list of requirements for individual parameters of the future project.

You should choose the right place to place your home swing

It is necessary to ensure that there is enough free space. With maximum range of motion, it is necessary to exclude the possibility of contact with walls and pieces of furniture. For this reason, it is not recommended to install rope structures in arches and doorways. Here it is better to use rigid suspensions for swings with fastenings that block movements in lateral directions.

When creating high-quality factory products, safety issues are well thought out

Multi-point soft belts are designed to secure the body. Rubber supports prevent the product from sliding on a smooth floor. Soft pads on the bars prevent injuries. Such swings for home can be quickly disassembled. Therefore, during the summer holidays you can take them with you to the dacha. But we must remember that many of the models of this type are intended for indoor use. Fabric and some other elements will be damaged by precipitation and other natural influences.

In this beautiful design, technological suspensions on chains are covered with soft decorative casings

This project was created taking into account the characteristics of a specific interior. It does not imply the possibility of moving the swing to another location.

Adult mounted modifications are distinguished by their large size and appearance. These products are designed to accommodate the appropriate weight of users. Of course, they are also quite suitable for children.

You can buy a special assembly kit for your dacha

But upon careful study of this photo, it is not difficult to find out that such a wooden swing is not too difficult to make with your own hands. Chains, rings, fasteners are standard metal products. Beams and other wooden parts can be ordered from a carpentry shop, or you can create them yourself.

Original round swing for the garden

Important! It should not be forgotten that all outdoor structures made from such materials must be protected with special impregnations and varnishes from insects, rain and sun.

Children's rope swing

A child will like even a simple product

The board cut to the required size is carefully cleaned, burrs are removed, and the edges are rounded. It is secured to the ropes with your own hands, choosing a suitable tree branch. The whole process will take no more than an hour using available materials and inexpensive carpentry tools.

Swing on chains

Such hangers can be used to secure a fairly heavy structure. The maximum permissible loads can be taken from the accompanying documentation for chains of a particular brand.

“Blanks” for the seat and other parts of this structure were created by nature itself. The craftsman created the required dimensions with his own hands and completed the assembly.

Outdoor hanging garden swing with backrest for the garden

Welded joints and forged elements are used here. The rigid frame is made of metal. Pleasant “warm” seat – made of wood. A large translucent polycarbonate sheet provides good protection from rain and sun. It weighs little, so it does not create unnecessary stress on the power elements.

How to make a swing from pipes

“Leader 2” – photo of a factory-made kit for equipping a children’s playground

It is made from a profile pipe with a high-quality protective coating

One of the advantages of this solution is simple assembly. All products exactly correspond to the dimensions specified in the project. The kit includes the necessary fasteners. The table below shows the main characteristics:

Swing made from corrugated pipe: drawings of a power frame

This figure shows that the dimensions of the product are set based on the height of future users.

PVC pipe construction

The implementation of such a project is simplified by a wide range of finished products for creating straight sections, turns, triple joints, and other components

You can quickly assemble a children's swing from plastic parts with your own hands. They are distinguished by their light weight, high resistance to precipitation, and affordable cost.

Important! You should remember the limited load capacity of such plastic structures.

Hoop swing

You can buy a ready-made set, or weave similar products with your own hands

In this hammock, high walls provide increased comfort and safety.

To create a large structure, a durable metal ring is used

Using these drawings you can learn how to make a standard seat and a modification with a backrest from two hoops

Scheme for creating a flexible surface on a ring frame

The following algorithm will help you figure out how to weave a swing yourself:

• In the first stage (1), two ropes are secured with knots on a hoop at an acute angle. A similar component is created on the opposite side with a loop overlap in the center during installation.
• The same unit is installed in the perpendicular direction (2).
• Continue filling the free space at different angles (3). All ropes are pulled tightly so that they do not sag.
• At the final stage, a circular track (4) is installed. Fixation sites (nodes) are marked with blue dots.

Children's swing balancer

As in previous versions, swing scales for the playground can be purchased

A similar domestically produced design costs from 5,500 to 7,800 rubles. They offer welded products, for transportation of which you must use a suitable vehicle. If you purchase a dismountable kit, you can install it yourself. The “outdoor” version is intended for intensive use, including on public children’s playgrounds. During personal use with relatively lower loads, the service life is much longer.

Seat design

Garden swings are usually equipped with seats in the form of small sofas or armchairs. On such a swing you can relax both sitting and lying down. The base of the seat can be fabric or metal mesh.

Fabric-backed seats are typically found on the most affordable models. They are vulnerable to moisture and are designed for light loads. They gradually wear out and require replacement.

The base made of woven metal mesh is much more reliable, practically does not wear out, and can serve for decades. Withstands almost any load. But such swings must be equipped with a special backing that is laid between the base and the seats themselves.

The backing protects the soft sofa from damage due to contact with the mesh. It will also protect your hand if it slips between the pads.

Elements of a children's country swing

In this section of the site, individual components of the structures are studied in detail. This data will be useful when selecting components for a specific project.

Swing seat

Plastic seat for children's swings with a fixing partition. The ergonomic shape ensures comfortable placement of the child. An additional waist belt can be installed in special slots

This seat is intended for the older age category. There are no special elements that increase the level of security

Large swing sofa with backrest suitable for children and adults

A car tire is a good inexpensive basis for creating different designs. Such outdoor children's swing seats for summer cottages can be mounted on chains in horizontal and vertical positions

Original swing made from a wheel

This photo of a tire swing shows a diagram for installing metal fasteners with your own hands. Staples, nuts and other parts of the structure can be purchased at a specialized store

Swing canopy

You can use different materials to create a high-quality canopy for your garden swing with your own hands. The photos below show examples of relevant engineering solutions:

Lightweight and durable polycarbonate sheet

Fabric cover with elastic insert along the contour can be quickly removed for cleaning in the washing machine

Soft roofing materials are quite suitable for equipping objects from the category of small architectural forms

Canopy made of profiled metal sheets on a wooden crate

The swing can be installed under the pergola

Frame for children's swings

Load-bearing elements, connections, and fastening points must withstand the weight of the structure itself and its users without damage. It is necessary to take into account additional dynamic loads that are generated during the use of the swing. Below are examples of individual engineering solutions that are used in practice in professional and home-made designs.

Reliable support from beams installed in the shape of the letter “X”

The strength of the wooden frame is ensured by the metal corner

Attaching the swing to the crossbar using a bearing increases the reliability of the unit

A special factory-made kit with a carabiner for connecting a suspension made of rope or chains

Swing supports

The entire structure frame is based on supports. They are responsible for the permissible load and stability. Supports must be selected based on the location of the swing.

Supports in the form of legs are often found. This is a convenient and practical option, but requires a flat surface. Inexpensive models are usually equipped with such supports. They are suitable for concrete or paving surfaces. You should not place them on soft ground; they will gradually become bogged down, which, at a minimum, will negatively affect ease of use.

More modern and expensive swings are equipped with arched supports. The load is distributed evenly, which ensures stability on any surface. Can be protected by a layer of plastic. They are also usually equipped with additional support elements to prevent tipping over.

Where and how to buy children's swings for the dacha

When choosing the most economical option, it is recommended to pay attention to current sales. The widest range is offered by trading enterprises in St. Petersburg and Moscow. You can inexpensively purchase a simple set of a seat and a rope suspension. The cost of large sets with slides, houses and other additional elements is tens of thousands of rubles.

Garden swing: material matters

Convenience, aesthetic appearance and service life depend on what material the swing is made of. Most often, the design combines several types of materials, but the main requirements are for the frame and the sofa itself.

Full metal models:

• Advantages: the most common version of the swing is made of steel or aluminum pipe, protected with a special anti-corrosion coating. They are stable, durable, and are not afraid of dampness, precipitation, or temperature changes.
• Disadvantages: such models are difficult to move from place to place due to their heavy weight, the frame quickly heats up in the sun, and they only swing in the transverse direction.

Wooden swing:

• Advantages: stable, can be used without or with a soft covering, aesthetic appearance, fits into the interior of the terrace and the landscape of any garden.
• Disadvantages: they require regular treatment with varnishes or other protective compounds, and are not resistant to temperature changes.

Rattan swing:

• Advantages: the appearance can decorate any garden or veranda, they allow for swinging in different directions, they are environmentally friendly due to the absence of coatings with special chemical compounds.
• Disadvantages: cocoon swings can accommodate no more than two people.

The filler of the soft part of the swing also matters. Most often it is padding polyester or foam rubber.

• Synthetic mattresses and pillows do not require active use; they quickly wrinkle and require beating or shaking to restore their shape.
• Foam mattresses for swings are at least 5 cm thick, soft, comfortable and quickly return to their original shape after use.

Popular models of garden swings

Olsa Pagoda

Model with a metal frame and an awning that protects from the sun. The reclining seat is made of durable textile. All fabric elements are waterproof.

Arno Oasis Lux

The swing sofa can accommodate up to 4 people. The structure is made of metal, has a rigid base, a sun awning and a mosquito net around the entire perimeter. Softness and comfort are provided by fabric covers with foam filling.

Olsa Gabi

The swing is suitable for 2 people to relax. The metal structure can withstand up to 160 kg. The awning protects from the sun. The seat is covered with fabric.

Arno Werk Elite Lux+

Massive design for 4 people to relax at the same time. A mosquito net located around the entire perimeter protects against mosquitoes. The seats are soft, with additional cushions for comfort. The backrest tilt is adjustable.

Requirements for the frame of a garden swing

When choosing a garden swing, close attention should be paid to the frame, because all other parts of the structure are replaceable in one way or another, and both strength and service life depend on the base.

The most durable models are made of metal pipe. Characteristics taken into account:

• pipe diameter - from 38 mm to 60 mm;
• iron thickness - from 1.0 to 1.5 mm.

The higher these indicators, the stronger the structure. The maximum load on the swing depends on the thickness and diameter of the pipes. Most manufacturers claim that their products can withstand loads from 100 to 400 kg. But there are also more serious indicators that allow the use of swings in public places, for example, in sanatoriums.

The material from which the frame is made also matters. If it is a metal structure, then you should read in the instructions what kind of coating it has. Manufacturers protect metal products from rust and other damage by powder coating, and wooden swings are treated with varnish.

How much do garden swings cost?

The price of this country furniture depends on various factors. The rise in price of the model is affected by:

• size;
• maximum load;
• design;
• material of manufacture;
• design features (adjustable roof, removable covers, mosquito net.

The cost of garden swings varies, so everyone chooses a suitable model in an affordable price segment. A structure for an open space can be purchased for 6,000 - 15,000 rubles. These are budget options, often found on plots in private homes. Elegant capsule swings or cocoon swings are more expensive - from 18,000 to 25,000 rubles, which is due to the price of rattan, which is not cheap all over the world.

Rating

Above All Double Swing

Advantages

• Appearance
• Sustainable
• Strong

Flaws

• Complete set with parts

BabyGrad Swing boat

Advantages

• Durable
• Bright
• Inexpensive

Flaws

• No

Plastic Hanging swing “BABY”

Advantages

• Sturdy plastic
• Comfortable deep fit
• There is a partition
• Lungs

Flaws

• No

Gnome Swing

Advantages

• Durable frame
• Easy to care for
• Lungs
• Well crafted wood
• There are carabiners for hanging the swing
• There is a backrest

Flaws

• Don't leave it outside for long

Vyatka sleigh Classic

Advantages

• Inexpensive
• Simple
• Spacious

Flaws

• Tree with splinters
• No coverage

Gusio Children's swing

Advantages

• Sustainable
• Durable
• Bright
• Height adjustable
• Seat belts

Flaws

• No

Kampfer Swing Nest medium

Advantages

• Comfortable
• Reliable
• Strong
• Easy to hang

Flaws

• No

BabyGrad Swing 3 in 1

Advantages

• Seat belts
• Bright
• Collapsible
• Lungs

Flaws

• Quite narrow seat

ZEBRATOYS Children's hanging swing

Advantages

• Simple
• Bright
• Lungs

Flaws

• No fastenings included

ZEBRATOYS Solid children's hanging swing

Advantages

• Comfortable seat
• Safe
• Lungs
• Sturdy plastic
• Wide

Flaws

• No

KMS Wooden children's swing

Advantages

• The wood is well finished
• The cords are strong and durable
• Fastenings included
• Lungs
• Reliable

Flaws

• No

GLOBEX Swing Veterok-Lux

Advantages

• There is a horizontal position
• Soft belts
• Compact
• Child-friendly seat
• Lungs

Flaws

• Some users complain about the instability of the structure

GLOBEX Swing Breeze

Advantages

• Compact
• Bright
• There is a side
• Folding
• Lungs

Flaws

• Unstable outdoors - requires installation on a level surface

Leko Children's swing with backrest

Advantages

• Lungs
• Bright
• There is a backrest
• Durable

Flaws

• No

Edu-play Children's swing hanging Teddy Bear

Advantages

• Bright
• Durable
• Appearance
• Wide
• Removable backrest

Flaws

• No

Vyatka sleigh Classic C

Advantages

• Well finished handrails
• Strong ropes
• Comfortable swing
• Lungs

Flaws

• No pillow under the butt
• Some users complain about splinters in the seat boards
• Short ropes

TechnoK Swing “Baby” (3015)

Advantages

• Lungs
• Bright
• Durable
• Safe

Flaws

• Partition too close

IgraGrad Swing “Nest” 100 cm

Advantages

• Sturdy mounts
• The mesh does not cut in
• Reliable
• High side
• Adjustable length of ropes

Flaws

• No

KETT-UP Swing “Boat”

Advantages

• Mounts included
• Bright
• Wide
• Lungs

Flaws

• No

Triumph Nord Balance swing

Advantages

• Spins like a carousel and like a balance beam
• Durable
• Bright
• Available instructions
• Easy to assemble

Flaws

• No

Vladsportprom Wooden swing

Advantages

• Lungs
• Price
• The seat is comfortable
• The baby doesn't fall out
• Well made

Flaws

• No soft seat

DFC Single seat swing (BS-02)

Advantages

• Bright
• There are seat belts
• Lungs
• Comfortable seat

Flaws

• No

Edu-play Children's swing hanging 3 in 1 Do Re Mi

Advantages

• Safe
• 2 backrest positions
• Wide seat
• Strong
• Don't burn out

Flaws

• No

DFC Multifunctional children's complex (MSG-01)

Advantages

• Durable
• Sustainable
• Convenient with several children
• Quality of materials

Flaws

• A little space between the swings

Fairy Swing Charlie

Advantages

• Compact
• Foldable
• There is a strap between the legs
• Lungs

Flaws

• Low child fixation
• The seat doesn't fit well

Fairy Swing Baby for two

Advantages

• Sustainable
• There are jumpers for the legs
• Spacious
• Compact
• Bright

Flaws

• Only suitable for very young children
• Children slip out of their seat belts

Twine Swing hanging

Advantages

• Quality materials
• Durable
• Inexpensive

Flaws

• Wood requires processing