How to make a flowerbed from a stump

You can create a flowerbed in an old stump in just five steps. All you need is a set of tools, some soil and seeds of the flowers you want to plant. Want to know more? Read the article quickly!

After cutting down old trees, stumps remain in the garden. In most cases, site owners either uproot them or try to otherwise “integrate” them into the garden design and use them as pieces of furniture, flower stands, decorative elements, etc. But you can also make something original out of them, for example, arrange a flower bed right in the core of the stump.

Making a hole in the stump

There are several ways to make a hole of the desired size and depth:

if you have a gasoline or electric saw, make cuts and then use a chisel to cut out pieces of wood;
you can make a fire and burn a small hole;
Drill holes in the center of the stump and add Epsom salt or saltpeter and wait a few weeks. During this time, the “chemicals” will make a depression in the trunk, the wood will collapse, and you will be able to form the edges of the funnel;
use a hoe, cutting a hole in the center with the sharp end, and then deepening and widening it with the wide end.

The depth of the hole should be about 10-20 cm, depending on the diameter of the stump and the number of plants that you plan to plant there.

Preparation and selection of suitable plants

The strength of driftwood does not always allow its use in large design projects. If the structure is weak, then small indentations for seedlings are cut out on top. 2-3 large flowers or bushes, or 4-5 small ones are placed inside. If the stump on the site is strong, then the inner part is hollowed out with a construction tool. A hole is made on the side to remove excess moisture.

On a note! Regardless of the characteristics of the flowerbed, its interior is filled with prepared soil. You can buy it in advance.

The choice of seedlings depends on the height of the snag. If it is tall, then attention should be paid to small climbing plants:

Shrubs bloom luxuriantly all summerDesigning a recreation area in the garden, decorating unsightly corners of the garden area is a labor-intensive task...

princes;
clematis;
codonopsis;
tladiant;
sweet pea.

You can fix climbing plants on uneven bark. The less artificial fasteners you see, the better. If you plan to place several vines, then 2-3 cords are lowered from above. After 3-4 weeks they will be occupied by vines. The result is that a green column will appear on the site.

What flowers do I always decorate garden paths with? To decorate garden paths, low-growing plants are most often chosen. They bloom more luxuriantly, have rich...

What to remember when creating a flower bed from a stump

When forming a natural flower bed, you can experiment and improve standard methods for creating it:

if you remove the core from the center of the stump using a hand tool, drill holes around the perimeter of the hole and in the center - this will simplify the work of hollowing out the core;
if you plan to burn the center of the stump, use kerosene - it will saturate the wood and it will burn better;
You can plant almost any flowers in a stump, but marigolds, forget-me-nots, primroses, pansies, daffodils, petunias, purslane, tulips, geraniums and begonias will look best in it;
You can further strengthen the stump by installing plastic pots in the recess of the trunk. And then pour soil into containers and plant plants in them.

Don’t rush to uproot the old stump - perhaps it can still become an excellent flowerbed in eco-style. Such an original solution will attract the attention of neighbors and guests of the dacha to your site and will leave them with an unforgettable impression.

Which stump is suitable for making a flower bed?

Before you start building a flower bed, you need to carefully inspect the stump. After all, if a tree was cut down due to rot, then it will be difficult to work with such a stump.

You may be interested in: We make flower beds and flower beds with our own hands from scrap materials

But if the tree was removed for other purposes and its base is not rotten, then its stump will be an excellent place for making a flower bed.

Photo gallery:

Flowerbed under a tree - 33 ideas for flower beds not like everyone else

Friends, in today’s post I would like to share with you ideas for decorating a flower bed under a tree. There are quite a lot of options for decorating the tree trunk circle, I have chosen the most interesting ones, let's look together at flower bed ideas that are not like everyone else's.

One option for decorating an existing garden is to create raised beds around the trunks of mature trees in the garden.

To create such a flower bed you will need wooden boards or a wide border strip, which is sold in gardening stores.

You need to install the boards by connecting them with corners or screws to form a frame. The border tape needs to be dug in 1/3 of the width.

First, you will need to loosen the soil around the tree and add some drainage. You can use expanded clay or crushed red brick as drainage.

Then you should fill the resulting flowerbed with fertile soil, and then plant flower seedlings there or sow annuals. It is best to plant shade-tolerant plants, since the crown of trees often provides dense shade.

You can see for yourself that in order to get a beautiful flowerbed, you don’t need to allocate a separate piece of land for it, “tearing” it away from the garden.

A raised flower bed is a rather expensive structure, but it lasts for many years and therefore justifies all the costs.

To build it you need a drawing with exact dimensions. You also need to choose a material for manufacturing that is strong enough to withstand the weight of the earth: for example, bricks, stones, wood, etc. It is better if the volume of the flower bed is small.

Cladding brick idea

A good idea for a flower bed in a tree trunk circle. Decorative facing bricks act as walls.

Flagstone option

There was a simple flowerbed, but it became a raised, breathing one. Flagstone edging. The stones themselves are not secured in any way, but due to their heaviness they hold up well. The flowerbed breathes and requires regular watering due to this drainage.

Pentagonal flower bed bench around a tree

An interesting idea for a wooden flowerbed - a bench. You can sit in the shade and enjoy the flowering plants.

A beautiful option made of figured bricks

And here is another interesting option made of figured bricks, and also not on cement, but just the way the structure is put together. You can disassemble and reformat if desired.

Round flower bed before and after

The owners of this plot made a flower bed around a mature pine tree and sowed a lawn. It turned out quite attractive.

Seasonal flower bed made of brick

And this is an example of a small, seasonal flower bed around a tree. One brick, placed on its edge, glued with glue to hold it in place. The soil was filled inside and petunias were planted.

Flowerbed around a tree from what was

If you have a number of blocks that are unnecessary this season, then they can be temporarily used for a tree-trunk flower bed. The idea, so to speak, comes from what happened.

This is where I end the collection! I hope you take something from it for yourself. There are many ideas, all different and interesting. All the best and creative inspiration to you!

Source

What stumps are suitable for flower beds

Almost any stump is suitable for creating a flower bed. The only exceptions are very rotten rotten stumps, infested with woodworms and other pests. Pine and spruce are of little use for flower gardens, because their wood is very short-lived, and the resin it contains can inhibit plants. The best option would be the remains of oak, maple, elm, and fruit trees. The thicker the stump, the wider and more magnificent the flowerbed will be.

Second life of an old tree

Untreated wood is short-lived. In order for a flower garden to last for more than one year, the wood should be impregnated with special antiseptics, painted or varnished. The lifespan of a stump is also affected by the method of planting. If the earth is poured directly into the cut-out hole, the tree will inevitably begin to collapse. To prevent rotting, use pots that are inserted into the holes.

Simple miniature for beginners

Decorating the area around the stump

Sometimes, having decorated a stump, it seems that something is still missing for the harmonious appearance of the flowerbed. Therefore, you can use small animal figures or a gnome with a solar-powered garden lantern. You can also use decorative pebbles to make a path to the stump and sprinkle them around it. And arrange a miniature garden of various types of hosta around it. To do this, larger hostas are planted in the background of the flowerbed, turning into miniature hostas in the foreground.

Here the gardener’s imagination knows no bounds, and, having a pencil and paper, you must first outline which flower seedlings you will need, and then purchase them. This is done in order not to purchase seedlings that will not be able to participate in this composition.

Actually, such flower beds are arranged where there is a stump, but if it is possible to place the uprooted stump where the gardener needs it, then the place is selected taking into account that the composition is clearly visible. A decorated stump will look good near a gazebo or next to another seating area.

But the stump should not interfere with movement around the site. If it gets in the way, then it will need to be moved to a place where it will look great next to it:

from the swing;
with a pond;
with barbecue.

Recommendations that will simplify the creation of a flower bed based on a stump

It will be easier to remove the core of the stump if you drill or cut holes around the perimeter of the recess. And only then start hollowing out the core.
You can make a hole using a small fire. To do this, pour a little kerosene or gasoline into the middle and set it on fire. In this case, a bucket of water should be ready to extinguish the fire in time so that the stump does not burn completely.
To prevent the stump from collapsing after each watering of the flowers, it is better to install a plastic container inside and plant flowers in it. This could be an old flower pot, a plastic bucket no larger than 3 liters, you can cut a plastic bottle with a capacity of 5 liters..

So, if there is an unnecessary stump on the site, you should not rush to throw it away, because with its help you can create a unique masterpiece of design art.

Unusual flower beds made from stumps, made by yourself video

Read about the money tree here.

Container gardening - mobile flower beds
How to create multi-tiered flower beds
Flowers for a flower bed are the best (100 photos)
Flowerbeds are the most beautiful
Umbrella flower beds
Cereal bed: wild and unusual
How to make a discount with your own hands
Flowerbed butterfly
Floating flower beds - an original decoration for a pond
Flowerbeds in the form of a tea set - cups and teapot
Flowerbed stream - spilled beauty
Vertical flower bed

Technology for creating a flower garden in hemp

Having chosen a suitable stump, you can move on to the next, more interesting stage. It is important to follow all recommendations.

What to plant in an unusual flowerpot

The choice of plants depends on the location and size of the hemp flower bed. The larger the size of the cut tree, the larger the flowers can be planted in it. Small stumps are suitable for making compositions only from miniature plants.

You can create a composition from several stumps

It is very easy to select residents for a stump flower bed located in the sun. These can be any light-loving plants with a not very powerful root system. The ideal option is beautifully flowering annuals. If the stump is in the shade, you need to look for shade-tolerant species. It could be periwinkle, lilies of the valley, violets.

Flowerbed stump in the garden