Calculation of the amount of material
Before erecting a fence from corrugated sheets with metal posts, it is necessary to calculate the material required for your fencing.
Calculation of the number of metal profile sheets
To determine the number of sheets needed for your fence, you need to know the total length of the fence and the width of one profile sheet. Dividing the length of the fence by the width of the sheet we get the required number of profiled sheets.
Profiled sheet stylized as natural materials
As for the length of the profiled sheet, it depends on the height of the fence. Standard sheets are available in lengths 2.0; 2.5; 3.0 meters. But if you wish, you can order sheets of the length you need from the manufacturer. This is especially true if there are large differences in terrain elevation along the fence line. And in order not to mount the sheets with ledges, you can align the fence along the top edge, using sheets of the required length.
How many self-tapping screws are needed?
As you know, self-tapping screws are used to attach the corrugated sheet to the transverse horizontal joists. Therefore, their number directly depends on the number of rows of veins (two or three, depending on the height of the fence). Having calculated the number of screws required to fasten one sheet, we multiply it by the number of joists and the total number of sheets.
It is advisable to choose metal screws to match the tone of the fence
How many pillars
The number of pillars depends on the length of the fence and the width of the spans. The recommended distance between posts is from 2.0 to 2.5 meters. So, with a fence length of 40 meters, with a support spacing of 2 meters, 21 posts will be required. However, the optimal selection of spans and number of pillars is made on site directly during marking. Since there are often various landscape nuances on the site and the fence line is not always the correct shape.
The number of pillars depends on the length of the fence and the width of the spans
To support a corrugated fence, metal pipes with a round, square or rectangular cross-section are used. The minimum pipe diameter for a post is (50-60) mm, wall thickness is at least (2.5-3.0) mm. When choosing material for posts, you should also take into account the wind load in the area where the fence is installed.
How tall are the pipes for the poles?
The length of the profile for the posts is selected taking into account the height of the fence and the part that will be walled into the ground. For different regions, this distance is not the same and depends on the type of soil in a particular area. Thus, in the case of heaving soils, it is recommended to go below the freezing line. For other soils, the ratio of the visible part of the column and the underground is calculated as 2:1. For example, with a 2-meter fence, it should be deepened into the ground by 1 meter. Therefore, material with a total length of 3 meters will be required.
in case of heaving soils, it is recommended to go below the freezing line
Number of cross beams
The number of lags directly depends on the length of the material chosen for them and the method of attaching them to the supports. In our case, the metal profile has a standard pipe length (3 m, 5 m, 6 m). When welding, the optimal length of the logs is selected taking into account the multiplicity of spans.
When calculating the amount of material for veins, you should also take into account the height of the fence. Because different numbers of rows of veins are used for different heights.
The number and location of veins depending on the height of the fence
In order for the fence to stand securely and not bring you unnecessary worries, you should entrust these calculations to professionals.
What to plant along the fence?
Gardeners and amateur flower growers have no question about how to cover a corrugated fence from the inside or outside. For this, climbing plants are used - virgin grapes, ivy, decorative beans, clematis, climbing roses and other perennial and annual plants.
In the area along the fence you can plant spruce trees, shrubs, and in front of them - flowering plants of various heights (cosmos, iberis, lilies, other flowers suitable for the chosen garden design). Often flowerpots with flowering plants are placed on poles.
Variety of metal structures
The beauty and environmental friendliness of wood is undeniable, but from a practical point of view, a metal fence for the front garden wins. Forged fences successfully combine high performance properties with decorative properties. The variety of metal structures is represented by the following types of fencing:
- Forged Products;
- fences made of corrugated sheets;
- metal picket fence;
- lattice fences.
Forged fences
Front gardens decorated with wrought iron fences are extremely elegant. Stamped fencing elements are presented in specialized stores; an individual order from a craftsman will help you become the owner of an exclusive fence. Depending on the height of the fence, it can serve a purely decorative function or become a reliable protection for the front garden from animals.
The cost of the fence depends on the complexity and number of forged elements. The installation of a forged structure is preceded by a preparatory stage in the form of pouring the foundation and installing support pillars.
Attention! The significant weight of the forged elements forces the use of assistants and lifting equipment in the design of the fence; it will not be possible to complete the work yourself. When the foundation with supporting pillars gains strength, they proceed to installing forged sections for fencing the front garden
At this stage, special equipment and welding skills will be required. After the process is completed, the welding seams are cleaned and sanded, the surface of the forged fence is degreased and treated with an anti-corrosion compound. At the final stage, the forged fence is painted
When the foundation with supporting pillars gains strength, they proceed to installing forged sections for fencing the front garden. At this stage, special equipment and welding skills will be required. After the process is completed, the welding seams are cleaned and sanded, the surface of the forged fence is degreased and treated with an anti-corrosion compound. At the final stage, the forged fence is painted.
Wrought iron fences are valued for the opportunity to admire the beauty of the front garden without losing practical functions. Photos will help you enjoy the beauty of forged fences:
Rabitz
Chain-link mesh has become widespread when fencing front gardens. Installation of the fence also requires the installation of metal support posts. It is preferable to install sections by welding. A wire stretched between the cells and connected to a support will help maintain the shape of the grid without a frame. The front garden, where the chain-link mesh is decorated with metal corners, is more attractive.
Comment! Such a fence can easily be converted into a hedge by planting climbing plants along the structure.
When choosing a chain-link mesh, give preference to a product with a galvanized coating, which will prevent the development of rust and increase the service life of the structure as a flower garden fencing.
Both perennial climbing plants and annuals can decorate a front garden with a chain-link fence. Popular:
- girl's grapes;
- various varieties of clematis;
- wood plier;
- sweet pea;
- morning glory.
Corrugated fences
The metal picket fence is identical to the wooden structure. The function of support pillars is performed by pipes. Between them there are horizontal metal elements onto which sheets of corrugated sheets or individual strips are fixed. When using separate strips, the consumption of fastening material increases significantly.
The attractiveness of a front garden with a fence made of corrugated board will increase if you choose multi-colored elements or an imitation of the texture of stone.
Decorating Tips
Decorating a fence made of corrugated board depends only on the imagination and finances of the owner of the land plot. Budget options are full of originality.
There are interesting combinations in decoration. For example, a fence made of corrugated sheets is attached to brick pillars, and forged or copper parts are installed on top. Wooden elements are combined with plant elements.
Expert opinion
Vladimir Ulyanov
I have been involved in fences for over 10 years, answering questions and helping people cope with the installation task on their own.
Ask a question to an expert
The main thing is that the design elements of the house do not conflict with the design of the fence, but rather emphasize and complement each other. It looks advantageous when the corrugated sheeting matches the same color scheme as the roof of the building.
Color options
At the production stage, a galvanized profiled sheet is coated with a polymer layer that performs protective functions and gives it color. This coating does not fade when exposed to sunlight and retains its original appearance for a long time. A rich color palette makes it easy to choose a shade of material that will harmonize with the atmosphere of the house and site.
Calm tones are popular - brown, red, beige, gray. This color scheme will be appropriate in any setting. A white fence looks fresh and will become a real decoration of the dacha. Black color gives a strict and solid look, however, dark fencing requires more care, since dirt is more visible on it.
The bright color scheme amazes the imagination with a riot of colors - rich burgundy, exquisite green, luxurious blue and shining yellow shades of a fence made of corrugated sheets will transform the atmosphere. Rich tones can be combined with home decor elements such as the roof or garden decor. A bright fencing can also act as an accent.
In the example presented on the left you can see how holistic and harmonious the site with the house looks. This effect is achieved by designing in the same style and color.
Modern technologies make it possible to create metal sheets simulating wood or stone textures
Fences made from such materials look unusual and attract attention.
Corrugated sheeting imitating the texture of wood adds coziness to the design of the area. The photo shows how well this material combines with brickwork and harmonizes with plants.
Types and design options for corrugated sheets
The design of a fence for a private house made from corrugated sheets is the result of a creative approach shown in relation to a durable and common, but banal building material. To avoid a standard street cluttered with simple sheets, owners of land plots invite a professional designer or decide on design options themselves:
- Quite often, whimsical imagination and careful calculation combine to produce unconventional, original, and striking fence options that passers-by and neighbors are happy to look at.
- On our website we gladly post photos of the design of fences made of corrugated sheets. Preference is given to photographs or slide shows of courtyard interiors that demonstrate non-standard solutions in the use of trivial and relatively cheap materials.
- Sometimes a person choosing corrugated sheets on construction markets cannot even imagine what can be made from the materials listed in the price list or neatly folded. In its initial form, it really doesn’t look as beautiful as it can be done if you carefully think through the design of a fence made of corrugated sheets and use additional decorative elements, stylish fasteners, and color combinations.
Fence design with a stone foundation
Construction specialists pay great attention to the strength and reliability of the structure, using super-reliable fastening elements, pillars, and a strong and stable foundation.
Designers have a special ability of imagination that allows them to turn corrugated board fencing into stylish components. They use various possibilities of decoration and original design. A person chooses a profession based on certain inclinations and characteristics of the mind.
Fence design with brick pillars
Any photo gallery that depicts various types of fence designs clearly demonstrates what a creatively minded person can make from standard decorative elements offered by the construction industry or invented independently and made with their own hands.
In the photos below you can see how to make a fence made of corrugated sheets shocking, attracting attention, organically fit it into the surrounding landscape or emphasize the unusual design. For this purpose, there are a variety of elements, arranged in random order by the owner at the dacha or on personal land ownership during the construction of a residential building. Special skill lies in the ability to combine, combine incompatible things, select colors to match individual elements of a residential building, its style component.
Constructions
Before starting construction, it is important to decide what design the fence will be. There is little choice here: the lower edge can be buried in the ground or located above the ground
The distance between the fence and the ground is a prerequisite if construction is carried out on a slope or on excessively wet soil.
It is also worth remembering that wind and dust will gradually erase the protective layer of corrugated sheeting and it will need to be tinted to avoid rust.
But there is another way out - install special U-shaped profiles on the fence for protection. They will also need to be tinted every few years, but this is much easier than dealing with rust on the fence itself.
If round pillars made of brick or wood serve as supports, the fence frame must be mounted overlapping, that is, by welding the joists and the surface of the pillars, and the sheets must be attached exclusively to the joists. In the same way, you can assemble the frame on rectangular supports. Professional developers often do this.
But for greater strength, it would be useful to secure the logs in the space between the supports so that their outer parts coincide. With this assembly method, the sheets can be attached to both supports and joists. Of course, in this case you will need more self-tapping screws, but the strength of the structure will also increase many times over.
There is also a so-called modular (sectional) fence - each profiled sheet is framed around the perimeter by a frame and then welded to the supports. This option is very labor-intensive, but in the end such a fence will look more stylish and finished than a regular metal one.
Design options
A fence made of corrugated sheets is no longer such a novelty in the CIS, therefore it is actively installed by many owners of their private territories. This is because it is very easy to assemble, you don't need much knowledge to install it yourself.
Visually, corrugated fences can be divided into two types:
- solid;
- sectional.
A solid fence, as a rule, is made from one sheet of corrugated board and has a straight, even shape. The gates are made in the same style. It is worth noting that these are generally not long structures that can be used to enclose the entire area.
Sectional fences are the exact opposite of solid ones. This is because it is divided into sections consisting of sheets of this material.
As a rule, it is mounted on pillars made of brick or concrete. Since this design is more expensive, sectional doors are not in great demand in the CIS.
The dimensions of corrugated sheeting for a fence differ in length, so it is simply cut into equal parts.
The options for installing a fence made of corrugated board are so different that you can see completely different designs without knowing their names.
We recommend reading:
The best options for site planning: modern ideas, the best solutions and beautiful arrangement and design schemes (125 photos + video)
How to make drainage on a site: device, types, design and camouflage (110 photo ideas)
Do-it-yourself sliding gates: projects, designs, drawings, photos and video description of the construction (135 photos)
Therefore, structures are sometimes divided into two other types in order to describe in more detail what you want to build:
- foundation;
- supporting
Read here Do-it-yourself children's playground - 155 photo ideas on how to build and organize a children's playground on the site
In the first case, the support is the foundation itself, where the corrugated sheeting is installed. It looks quite beautiful, and such a fence can last as long as a support fence.
The only thing is that it can sag over time, which will become noticeable almost immediately.
Support fences are sectional options. Often the photo of a fence made of corrugated board shows just such options. But do not forget that this is quite expensive and sometimes it is not so easy to build such buildings yourself.
DIY corrugated fence: photo report
A fence from neighbors and a front fence were being built. The total length is 50 meters, height 2.5 m. Brown corrugated sheet is used on the front, galvanized sheet is used on the border, thickness 0.5 mm, grade C8.
In addition, the following materials were sent:
- for poles profiled pipe 60*60 mm, wall thickness 2 mm, pipes 3 m long;
- 80*80 mm with a 3 mm wall were installed on gate posts and gates;
- logs 30*30 mm;
- gate and wicket frame 40*40 mm;
One person built the finished fence from corrugated sheets with his own hands.
The fence is installed on metal posts, between which the base is then poured. The owners need it because they plan to plant a flower garden in front of the fence (you can see the fence made for it). It is also needed to prevent water from flooding the yard during heavy rainfalls. Metal sheets are not attached immediately from the ground, but slightly retreating. This gap is closed with a die-cut tape that remains in some industries. This was done on purpose so as not to block the access of air, so that the earth dries out faster.
Inside view of the finished fence
Metal preparation
The first stage is preparing the pipes. A rusty pipe arrives from a warehouse; in order for it to serve for a long time, you have to clean off the rust, then treat it with Anti-Rust and then paint it. It is more convenient to first prepare all the pipes, prime and paint, and then just start installation. The rust was removed with a metal brush mounted on an angle grinder.
Pipes need to be cleaned of rust.
There were only 6-meter pipes in the warehouse. Since the height of the fence is 2.5 meters, another 1.3 meters need to be buried, the total length of the post should be 3.8 meters. To save money, they cut it in half into 3-meter pieces, and the missing parts were welded with various scrap metal available on the farm: cuttings of corners, fittings, pieces of various pipes. Then everything was cleaned, primed and painted.
Installation of pillars
The two corner posts were installed first. The holes were drilled with a drill purchased from a store. The soil was normal; it took about 20 minutes to complete one hole 1.3 meters deep.
Post hole drill
The first pillar was placed horizontally and so that it rose above the ground to a height of 2.5 meters. To set the second one, it was necessary to recapture the height. A water level was used. You need to fill it in such a way that there are no bubbles - from a bucket, not from a tap, otherwise it will lie.
They placed the second post along the marked mark (they put it on a plank that was placed next to the hole) and concreted it. When the cement set, twine was pulled between the pillars, along which all the others were aligned.
The filling technology was standard: a double-folded roofing material was installed in the hole. A pipe was placed inside, filled with concrete (M250) and placed vertically. The level was controlled by a plumb line
Positioning the posts correctly is very important, otherwise the entire fence will warp
During the work, several times it turned out that the concrete was poured not inside the rolled up roofing material, but between it and the walls of the pit. It was a little pleasure to scoop it out from there, so the protruding part was cut into petals and nailed to the ground with large nails. Problem solved.
This is how the roofing material was fixed
After the concrete had set, we made portable formwork from boards covered with thick film. With their help, the basement was filled. To make it stronger, reinforcement bars are welded along the bottom to the pillars on both sides. Formwork was placed around them.
Formwork for plinth
Installing jumpers
Cleaned, primed and painted pipes for the crossbars were cut and welded. They cooked between the pillars. They also need to be leveled to make it easier to attach.
We cook jumpers
After the welding is completed, all welding areas are cleaned with a wire brush, treated with Anti-Rust and then painted.
Installation of corrugated sheets
Since the top lintel runs along the very top of the fence, and it is welded exactly level, there were no problems with leveling and installing the sheets. First they fastened along the edges, then installed intermediate screws. To make it easier to place them evenly, a thread was pulled between the outer ones.
Evenly installed fasteners are also beautiful
Afterwards the gates were welded and attached. As a final touch, additional elements were installed on top - a U-shaped profile covering the top of the fence and plugs for the pipes.
The final view of a fence made from corrugated sheets, made independently
As you understand, there is nothing particularly complicated
It is important to align the posts evenly and weld the frame. This is the main task
A lot of time - about 60% - is spent preparing pipes - cleaning, priming, painting.
Types of fences made of corrugated sheets
Beautiful fences made of corrugated sheets are distinguished by their durability and have a budget price compared to other materials. Therefore, it is actively used for fence construction. The variety of fences made of corrugated sheets determines three main options:
- solid;
- tall;
- noise-proof.
It is from this that you can make a strong and reliable fence in the shortest possible time, and installing it yourself will not be difficult.
Solid corrugated sheeting is a lightweight structure that was pre-welded. This option does not exceed a height of three meters. The design consists of connecting metal veins and pillars. In order for the latter to retain their original appearance for as long as possible and be less vulnerable to external irritants, they are covered with special caps.
Any corrugated sheet is a steel profile (or profiled sheet), which has already been painted and treated with special chemical compounds that provide it with anti-corrosion protection.
This detail prevents water from entering the structure, which helps avoid corrosion. The latter perform not only protective functions, but also decorative ones, due to their pleasant external design. This type of corrugated fence is most popular among buyers. A fence made of corrugated board as in the photo is perfect for private houses.
Polymers that are quite resistant to direct sunlight are used as coloring materials.
A high fence made of profiled sheets, photo, is distinguished by the more complex work of a team of designers who calculate all estimates down to the smallest detail. Such responsible work allows you to create fences with a height of three to six meters, without affecting the decrease in strength and stability.
A fence painted with high-quality polymer paint does not fade for a long time and does not change its original color.
This option is ideal for sites located near large highways with active vehicle traffic. However, it is also used for fencing summer cottages, for additional protection against entry into the property of thieves. Non-residential premises and factory premises also use this option due to the height.
In order to cut this material correctly and accurately, you need to use only a hacksaw or special scissors designed for cutting metal.
The last type - noise-proof fences made of corrugated sheets includes three subtypes:
- sound reflective;
- sound-absorbing;
- combined.
When the cottage is located near railway tracks, where the noise level exceeds permissible standards at night and during the day, then corrugated fences with a noise-insulating effect will be the most rational solution.
The colors used to paint steel sheets are available in both universal colors (brown, dark green) and any others - it all depends on the wishes of the customer.
Corrugated fences can be divided into types according to the specifics of their installation: longitudinal, vertical.
Material advantages
The main qualities of profiled sheets are accessibility and ease of installation. After all, if you compare how much a fence made from the same tree costs, it immediately becomes clear whose side has the advantage.
To install the fence, you only need to build a frame, on which you can then hang the canvas. Thanks to its relief structure, the material is considered quite durable and difficult to bend.
Corrugated sheeting is sold in different colors, which is well suited for implementing an unusual yard design. The material can be combined with stone, wood, lace forging, etc., as evidenced by the photo of a fence made of corrugated board.
What tools will be needed for installation?
If we have already touched on this topic, installing a fence made of corrugated board will require many tools, as well as additional materials. You will have to acquire all possible screwdrivers and drills, consumables, as well as screws and fasteners.
We remember that for such a structure you will have to deal with digging up the strip along which the fence will be laid. We prepare a shovel, measuring instruments, roofing felt, gravel, sand and, of course, cement.
We recommend reading:
- How to make swing gates with your own hands - step-by-step manufacturing instructions. 115 photos of options for building various types of gates
- Recreation area in the country: beautiful ideas, application and arrangement in landscape design (125 photos and videos)
- Do-it-yourself garden gate: modern models and unusual options for using gates (110 photos)
The amount of all this depends on the amount of work. Corrugated sheets for a fence are also, in fact, a material that is purchased along with all these consumables.
Step-by-step instructions for creating a fence from corrugated sheets on a metal frame
All work can be completed by two or three people. On small sites there is no need to use special equipment.
Installation diagram, drawings
A sketch of the future fence is preliminarily developed. If it is difficult to do this yourself, then look for it on the Internet. There are many examples of ready-made structures made of corrugated sheets, located both on flat areas and on sloped estates.
Frame dimensions: pillars - metal pipe 60x60 mm, logs 40x20 mm. The distance between the pillars is 2500 mm. The height of the column is 3000 mm, of which 1200 mm is recessed into the ground. Sheet height 2000 mm,
The diagram should show the dimensions of the sections, the height of the pillars, the distance at which the logs will be attached.
The characteristics of the soil and the distance from the highway, green spaces, and outbuildings are indicated.
Elevation differences, if any, are shown schematically. The type of foundation is applied.
The requirements for materials are briefly indicated. Cost estimates are calculated.
Marking
Performed using rope and wooden pegs. The main pegs are driven into the ground at the locations of the pillars, auxiliary ones - every linear meter. A rope is pulled between them at a strictly 90 degree angle.
Foundation
Key factors when choosing the type of base:
- climate and soil features;
- depth of freezing and occurrence of groundwater;
- load on the foundation (whether the materials will be light or massive).
Installation and fixation of pillars occurs at the stage of foundation arrangement, regardless of the chosen foundation.
In this case, profile metal pipes are used under the supports.
Frame installation
Involves fastening the joists to the racks.
This is done in two ways:
- Welding. Using a grinder, cut pieces 5 mm smaller than the distance between the posts. The covering of the pillars is protected at the fastening point, and the old paint is removed. The procedure is performed by three people: two on the sides hold the vein, the third welds it. The seams are cleaned. Defects and poorly cooked areas are eliminated. The process is repeated around the entire perimeter. The finished frame is primed. After a day you can paint it.
- Fixed with brackets. The holder is installed on the pole at the desired level on the sides or outside, it all depends on the design of the plate. Fastened with self-tapping screws. The jumper is applied to another pillar. Another bracket is fixed according to the level. The process is repeated around the entire perimeter. The logs are mounted to the plates from the reverse side.
Methods of fastening corrugated sheets
Prepare sheets of the required sizes. Remove the protective film.
Photo: determining the verticality of the sheets using a building level
The further procedure of work is described in this article: “How to screw a corrugated sheet onto a fence.”
Installation of gates and wickets
When the covering of the sections is completed, you should begin installing gates and wickets. Reinforced posts with a wall thickness of 3.5 mm or more are chosen for the gates. Garage canopies are welded to them. For logs, pipes with a cross section of 20*40 mm and a wall thickness of 2 mm are used. All connections are made by welding. The locking mechanisms are secured against fixing the sheets.
The sheets are installed to the frame in the same order as in the case of sections.
Users often search for:
- Gate for metal fence
- Do-it-yourself wooden gate for a fence
Wood-look corrugated fences
When choosing which profiled sheet is best to make a fence from, we can recommend giving preference to other options with a wood texture.
Thus, in addition to options with different color schemes according to the RAL and RR classifiers, many manufacturers also offer models even with interesting design patterns, thanks to which the fence can become exclusive in appearance.
Knowing how to properly install a fence from corrugated sheets, you can eliminate the risk of making mistakes, so the following points should be taken into account:
- the pillars must be buried below the soil freezing level,
- the distance between the pillars should not exceed 2.5 meters so that the structure can withstand wind loads,
- Attaching profiled sheets to horizontal joists is done using galvanized roofing screws.
Installing a profile fence in winter will require more time and effort, so it is best to carry out this work from spring to autumn.
Before starting construction, it is important to make a calculation in advance to determine the amount of material needed.
Lags
As for lags, it all depends on whether you work with welding or not. On the other hand, you can always find an acquaintance or just the right person.
So, here's a tree. Logs can be not only metal, but also wooden. If you look at a photo of a fence made of corrugated board, especially one taken from the outside, you are unlikely to be able to tell what the logs are made of. The difference lies in price and durability.
Wooden logs will cost you much less, and it’s easier to work with them - sawing, drilling, fastening, and the wood looks nicer.
On the other hand, wood is not very good with moisture - or rather, not at all, and only primers and varnishes and paints help somehow.
Metal, in turn, is a durable and reliable material, but quite expensive, and it’s more difficult to work with. If the budget is very limited, then for starters you can install wooden logs, but practice shows that after a couple of years you will need to think about replacing wood with metal.
In addition to everything mentioned above, you yourself understand that wood is inferior in strength to metal, and therefore you may need a larger number of logs, and, consequently, fastenings for them.
If your fence is up to two meters, then two joists will be enough. If the fence is already more than two meters, but less than three, then it’s worth taking three guides. For a fence higher than three meters, take four guides and you will be happy.
There's plenty to choose from
Look at the photos below and you will be surprised how differently a familiar corrugated fence can look.
Decoration
Using wooden slats painted in the color of a metal sheet, you can create a very cute fencing decor.
And the ability to draw will be useful for giving the fence a particularly unusual look.
It becomes the artist’s canvas and is able to reflect the entire inner world.
Fantasies that children will enjoy are also an interesting option for decorating a fence.
Figures and scenes from everyday life cut out of different materials will help give a more cheerful look to the inner surface of the fence.
Basis for ornamental plants
And arranging additional space for plants on the inside of a metal fence is the best solution for gardeners! The photo shows an unusual option for decorating a fence made of corrugated board.
Well-known trellises are used to place climbing plants on them.
Why not arrange such a trellis along the entire plane of the metal sheet from the inside? The plant will gain the necessary support, and the fence will immediately become brighter.
What trellises are, what they can be and how they are used is described in the next article. You can make them yourself, or you can purchase ready-made designs. Thanks to trellises, you can present your own area in a new way.
Wicket and gate
Profiled metal sheets are used not only in the construction of fence walls, but also in the manufacture of wickets and gates.
Types of gates depending on the opening and closing mechanism:
- Swing gates. The most common type of gate used. They have one drawback - for their installation and operation you need to have more free space. You can make such gates yourself.
- Sliding gates. One of the most convenient options in which site owners can save space, especially if there is almost none. Mandatory presence of upper and lower “rails” for the movement of the web.
- Lifting gates. They are installed for garages. Please note that they require room to climb from above.
- Decorative gates. Then the decoration carries only an aesthetic message. Swing gates are usually used for decoration.
The material can also be used for gates
Combining profiled sheets with other materials when erecting a fence
To get a beautiful, original structure from profiled sheets, it is necessary to use other materials during the construction process: natural stone, concrete, brick and forged elements.
Bricks, natural stones and concrete are used to construct a variety of pillars. In some cases, the base may be made of metal.
The most popular, democratic option is the construction of a structure made of corrugated sheets using metal poles. In addition, this method is also the fastest and easiest.
A fence made of corrugated board using pillars made of brick looks stylish and luxurious. However, the price of this design option is quite high.
Technology for constructing a fence from corrugated sheets
The process of building a fence must be prepared with special care. Even small errors during the design and installation of a structure can lead to unplanned expenditures of time, money and nerves.
After developing the construction project, it is necessary to accurately mark the entire area intended for the construction of the fence. In this case, it is necessary to accurately calculate the number and location of entrance gates and gates. All markings must be carried out taking into account the slope of the terrain.
Installation of support pillars
There are several options for installing mounting supports, the choice of which depends entirely on the nature of the soil, the height of the fence and the depth of groundwater:
- full concreting (with reinforcement);
- partial concreting (combined type);
- butting (strengthening with crushed stone and sand);
- driving supports.
The most reliable method is to install supports with full concreting. First of all, it is necessary to install the outer supports. It is necessary to dig holes for posts 150 mm wide and 1-1.5 m deep. Excavation work is easier to do with a hand drill. The amount of depth depends on the planned height of the fence: the greater the height of the fence, the deeper the supports will have to be lowered.
The technology for filling the hole is carried out according to a standard scheme. First, roofing material is laid to prevent the soil from shedding, then the pipe is set strictly according to the level. The next step is to fill the hole with concrete, while tamping the mixture periodically.
Three days later, after the concrete has completely dried, you can begin attaching the crossbars.
Fastening the crossbars
Installation of logs is carried out after reliable concreting of the vertical posts. There is no need to rush into the process of attaching the crossbars, so that the supports do not deviate from the vertical.
If you have a welding machine, as well as the skills to work with such equipment, you can securely secure the crossbars by welding.
You can also screw the logs to the vertical posts using special brackets. Thus, a special X-bracket is screwed to the support post. The cross beam is screwed to the bracket plate. This type of fastening makes the entire structure a little longer, which must be taken into account at the design stage of the fence. But the fastening is considered more reliable in terms of operation, and also simplifies repair work.
There are three main ways to attach crossbars to posts:
- At the back of the post using a bracket. This mount is very convenient for creating sectional fencing.
- Front racks (butt). The use of this method is very convenient when constructing a continuous fence.
- On the side of the support. The main advantage of this method is that the profiled sheet is attached not only to the crossbar, but also to the vertical post. This allows you to strengthen the entire structure.
The fully assembled fencing frame must be treated with anti-corrosion primer and paint.
Installation of corrugated sheets on the frame
The sheet is fastened using galvanized or painted rivets or self-tapping screws. If desired, the fasteners can be matched to the color of the fence, which will significantly improve the appearance of the entire fence.
Fastening through the wave of the sheet is considered reliable. To increase strength, fasteners can be installed in a staggered manner.
It is very important to position the first sheet strictly vertically during installation. Compliance with this condition will allow you to avoid problems during further installation of the entire fence
Each subsequent sheet overlaps the one installed on one wave, while the self-tapping screw is installed in the lower part of the wave strictly perpendicularly. Tilting the fastener can cause paint to peel and rust.
A fence made of profiled sheets is resistant to any type of precipitation and temperature changes. Has an aesthetic appearance. Such a fence is a reliable and durable structure that can protect any suburban area from external factors.
Methods for decorating a corrugated fence
The opportunity to realize your own ideas and show creativity - this is what will allow you to decorate a fence made of corrugated board! After all, with proper installation, such a fence becomes a decoration in itself.
If you decide to fence your site with a fence made of corrugated sheets, you will not go wrong. However, in order to fully experience its advantages, you should correctly install it. The next article on our site will help you understand the intricacies of choosing fasteners for corrugated sheets. After all, the durability and attractive appearance of such a fence largely depend on which fasteners are chosen.
If such a metal fence is located with the painted side facing the inside of the site (as follows according to the technology), then decoration will require mainly the part that is turned inward with the unpainted side. As a rule, this is the front part of the fence. It is here that inside the yard you can see the crossbars and pillars on which the corrugated sheets are attached. And this part of it will require decoration.
When choosing metal sheets painted on both sides, it is no longer necessary to decorate it. However, even in this case, some seek to give it a more “improved” look. And it often works!
Pros and cons of profiled sheets
Profiled metal sheet or corrugated sheet is a facing wall or roofing building material. It is mainly used in the construction of external fences, walls, and roofs.
- The cost of this type of building material is affordable for many homeowners.
- Profiled metal sheet, despite the sounding name, is quite simple to use. Therefore, it is suitable for building a fence with your own hands.
- High construction speed.
- The advantage of a structure made from this material is that, unlike a picket fence, the use of corrugated sheets allows you to prevent gaps between the sheets. In addition, the owner can also independently determine the height he needs.
- A good protective function: not every robber dares to climb over the fence for fear of cutting his hands on the sharp edge. In addition, this steel coating can hardly be called a reliable “support”.
The cost of this type of building material is affordable for many homeowners
- Enviable durability. If the rules of installation and operation are followed, this fence is very durable, up to several decades (from 20 to 50).
- High-quality material looks very aesthetically pleasing.
- Large selection of coating colors.
- The ability of protective materials covering a steel layer to maintain its original appearance for a long time, i.e. the metal does not fade under the influence of sunlight for many years.
- Ease of removing contamination using ordinary household chemicals.
- Good sound insulation and protection from prying eyes.
Profiled metal sheet is easy to use
Disadvantages of using profiled sheets:
- Still, when using corrugated sheeting, you will not achieve complete protection of the territory. Attackers can easily damage such a fence using improvised means.
- Attractive, but not perfect.
- A very large area of the fence is exposed to strong gusty winds, so the structure may simply fall.
- Corrugated sheeting is highly susceptible to rust. For this reason, it is worth taking care of the protective coating in advance, before putting the fence into operation.
High construction speed
Corrugated fences with brick pillars
So, the main types of fences made of corrugated sheets for private houses include options where pillars made of brickwork act as load-bearing elements.
The advantages of such a fence include high strength, beautiful appearance and the possibility of aesthetically decorating the fence using caps.
One of the disadvantages is the higher cost, since a full foundation is required for the pillars. Such a fence looks beautiful and elite, emphasizing the high social status of its owners.
